Read the new interview with our director, Tomáš Hruška, in the magazine *Reportáže z průmyslu*.
Tomáš Hruška has been at the helm of the Engineering Test Institute (SZÚ) in Brno for fifteen years now, having spent most of his professional life there: “The sector we work in is known as the TIC sector (an acronym for testing, inspection and certification) and developed gradually from around the mid-19th century with the advent of steam engines in England. These engines would occasionally explode, causing fatal injuries and material damage. Insurance companies, such as Lloyd’s, demanded certain rules, and that is when the first inspections began. The history of our organisation began in 1898 under the auspices of the Institute for the Improvement of Trades at the Chamber of Commerce and Trade in Liberec. I looked into why it was established here in particular – probably because, during the Austro-Hungarian Empire, a significant proportion of small-scale industry was concentrated in the Liberec region.”
Yes, we have a very long history. Last year we celebrated 60 years of operation under our current name, the Engineering Testing Institute, a state-owned enterprise, and in 2028 we are set to celebrate 130 years of continuous operation in the field of testing, which ranks us amongst the oldest testing laboratories in the world.

For the time being, all we know is that all state-owned enterprises will operate as branches within a single organisation, which will be created by renaming the current Technical and Testing Institute for Construction in Prague, s.p. This should result in a larger and stronger enterprise, which means higher turnover, more employees, greater synergies, and so on. However, there are also a number of risks that will arise when responsibilities are transferred to a different legal entity.
Europe is the most heavily regulated region in the world in terms of legislation. This has its drawbacks, but also significant advantages, the analysis of which would merit a separate article. I think it would be worth considering enforcing and monitoring existing obligations more effectively rather than adding more and more regulations. As recently as about thirty years ago, there were many importers operating in this country who could not care less whether their products were safe; their main concern was to sell them quickly and make a profit. Today, the situation is much better. In the 1990s, during privatisation, a number of large enterprises passed into foreign hands, and with that, their research and development departments and design offices often ceased to exist. At that time, the Czech Republic largely lost its own research and development capabilities. Today, however, the situation has changed significantly. Research and development are flourishing once again, and in many areas we are reaching world-class standards. One example is the space industry, where companies from Brno and the whole of the South Moravian region rank among the leading European players.
Of course. We’re interested in a whole range of new fields, such as photovoltaics and cyber security. And AI too, because artificial intelligence will be incorporated into many products in the near future, and we want to be able to assess it.
First and foremost, the fact that their government provides effective, long-term support for hydrogen and, unlike in Europe, does not distinguish between ‘grey’ and ‘green’ hydrogen. When we build a large office block here, the vast majority are heated by gas, sometimes in combination with heat pumps – that is, gas and electricity. In South Korea, fuel cells are already widely used on a large scale, either gas-based ones that produce hydrogen, or hydrogen-based ones directly. Government support there is very clear. In Europe, we lack something like this, although at our seminar all the invited experts spoke very positively and optimistically about the use of hydrogen in the energy mix and agreed that hydrogen technologies are among the key topics in the technological transformation of industry and the energy sector. Detailed information can be found on our website, which also features interviews with Czech experts and a representative from the Ministry of Industry.
We have been active in the South Korean market for many years. Under a commercial agreement, we have a representative office there – SZU Korea – which is our most important overseas partner. Its main role is to identify Korean manufacturers interested in entering the European market and, in cooperation with us, to provide them with conformity assessment, testing and certification services. However, this is not always a one-way process; sometimes it works the other way round – we help Czech manufacturers to enter the Korean market. A few years ago, for example, our Korean representative office helped us launch a Czech turbine on the local market. Czech construction products, gas appliances and other products have also long found a market in this Asian region.
It looks completely different today than it used to. Programmable test equipment, sophisticated software and a high degree of automation are now standard features. When I see it, I think to myself that I’d probably have to learn the ropes all over again. Back when I was working as a test engineer at SZÚ myself, we used to run around the equipment with stopwatches in hand, jotting down values in a notebook and then calculating the results on a calculator. Today, most measurements are automated and the engineer has all the data immediately available on a monitor. Compared to how things were done back then, it’s a completely different discipline.
I think that, particularly for a leader or director at a TIC company, it is certainly beneficial to have a technical background in what a testing laboratory does. The vast majority of successful testing laboratories in Europe and around the world are usually headed by a director or CEO who has worked their way up through this industry. It is certainly a significant advantage.
As a director, my primary role is to be a leader. If a group gets lost in the woods, the leader should climb a tree and tell them whether to go right or left. One of many definitions states that a manager achieves objectives with the kind assistance of others. That is also important. At the same time, I have a representative role and am responsible for a whole range of other matters, such as vision and strategy development, leadership and organisational structure, corporate governance and management, financial management, risk management, talent management, customer focus, the company’s reputation and image, innovation and technology, business continuity and succession planning. Naturally, I cannot carry out all of this on my own; that is why I have put together a team. Conversely, I should, if possible, avoid getting too involved in day-to-day operations.
I enjoy bringing visions to life. I think I’m quite good at getting things off the ground, but I’m not so good at seeing them through to the end – I need people to help with that. And I also need them to rein me in now and then and say: ‘Don’t be daft, we can’t do absolutely everything.’
In the roughly fifteen years I’ve been here, our company has risen to the very top, at least in the Czech Republic, and our vision is to become the leading company in the TIC sector in Europe. The fact that large multinational groups of our kind regularly contact us with proposals for collaboration or even acquisitions gives me feedback that we’re heading in the right direction.
We’ve launched a project to digitise the company, because without digitisation we won’t be able to use AI in the future. As far as I know, compared to other Czech testing laboratories, we’re well ahead in this respect.

The real art lies not only in selecting the relevant and important information from the mass of data and working with it, but also in discarding what is irrelevant and unimportant. And because there is an ever-increasing amount of information and data, the ability to decide relatively quickly what to discard and what to work with is becoming far more crucial.
When I have a ‘brilliant’ idea, I let it sit for a while. If, after a week, a month, or sometimes a year, it still seems good to me, only then do I start working on it.
In the Czech Republic, there is the Association of Accredited and Authorised Organisations (AAAO) – an association of testing laboratories – where I was elected this year for another term on the executive committee. I felt good about that; out of a possible twenty-seven votes, I received twenty-five. At a global level, there is the TIC Council, based in Brussels, which brings together around 130 testing laboratories from around the world, and I also hold a mandate there as an elected member of the Global Board. I see this as representing the Czech testing sector and as confirmation that SZÚ is heading in the right direction.
I am involved in the management of the association and, as a member of the global board, I help to decide on the direction the association takes. For example, we communicate changes to legislation. This year, after fifteen years, European legislation governing the placing of products on the market in Europe is being revised. For me, this means, amongst other things, providing feedback on behalf of the SZÚ, or on behalf of the Czech side where appropriate. For our company, my involvement in these institutions is beneficial in that I have good contacts with similar organisations around the world, so when we need a specific form of cooperation, I know where to turn. Networking, even amongst competitors, can be helpful; it doesn’t mean we’re just competing, but that we can also cooperate quite effectively.
A strong, well-functioning company that won’t even notice I’m not here.
We would like to thank the editorial team at AMAZING MEDIA, s.r.o. for conducting the interview and publishing it in the prestigious magazine Reportáže z průmyslu.
SZÚ team