Measurement of acoustic parameters of products
We are an accredited testing laboratory performing individual tests in accordance with internationally recognized standards and methodologies, primarily for determining sound pressure levels, sound power levels, and tonality. Customer presence during testing is possible, and measurement data can be provided upon request.
We can also carry out acoustic measurements simultaneously with other assessments, such as LVD, EMC, or performance testing.
Our Services
- Determination of sound power level
- Measurement of sound pressure level
- Tonality assessment
- Order analysis
- Informational tests to support optimization of product settings
- Noise source localization using our acoustic camera (from 800 Hz and above)
- Measurement of noise emitted by machinery at the operator’s position and within designated working areas (sound pressure)
- Measurements related to occupational noise hygiene to verify compliance with Government Regulation No. 272/2011 Coll
As an Authorized Body No. 202, we provide partial services related to the verification of acoustic parameters of selected construction products in accordance with Government Regulation No. 163/2002 Coll.
Furthermore, as a Notified Body No. 1015, we carry out acoustic parameter measurements, documentation review, and production audits in line with the requirements of EU Directive 2000/14/EC and Government Regulation No. 9/2002 Coll.
We also offer services for verifying parameters pursuant to the Machinery Directive 2006/42/EC (Government Regulation No. 176/2008 Coll.).
Tested products
We measure the level of sound pressure and sound power mainly on the following products:
- Heat pumps
- Floor convectors with fan
- Solid, liquid and gaseous fuel boilers
- Electric boilers and heaters
According to EU 2000/14/EC we ensure verification of compliance with the noise limit values primarily for the following products:
- compressors
- hand-crashing hammers
- source sets
- welding generators
- pressure fluid sources
- lawn mowers
Additional services
We provide independent measurements of the noise parameters reported in the manufacturer’s promotional materials (e.g. mandatory product fiches) under the Ecodesign of energy-related products. We are also able to provide manufacturers with development tests to optimize their product settings. We also use our acoustic camera to locate an undesirable source of noise (from 800 Hz above).
Standards
- ČSN EN ISO 3744, ČSN EN ISO 3745, ČSN EN ISO 3746
- ČSN EN ISO 9614‑1, ČSN ISO 9614‑2
- ISO/TS 20065:2023
- ČSN EN 12102
- ČSN EN ISO 11202
- ČSN EN 12102‑1:2018 Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors — Determination of sound power level — Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers
- ČSN EN 12102-2:2020
Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors — Determination of sound power level — Part 2: Heat pumps for water heating
- ČSN EN 15036-1:2007
Heating boilers — Test regulations for airborne noise emissions from heat generators — Part 1: Airborne noise emissions from heat generators
- ČSN EN 16583:2016
Heat exchangers — Water-to-air fan coil units — Acoustic performance
- ČSN EN ISO 7779:2020
Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment
- ČSN EN ISO 2151:2009
Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (grade 2 accuracy)
- ČSN EN ISO 11546-2:2010
Acoustics — Determination of sound insulation performance of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes)
- ČSN EN ISO 11094:1997
Acoustics — Test code for the measurement of airborne noise emitted by powered lawn and garden equipment, including lawnmowers, garden tractors, professional mowers, and related equipment
- ČSN ISO 7960:1997
Airborne noise emitted by machine tools — Operating conditions for wood-working machines
- ČSN EN ISO 16092-1:2019
Safety of machine tools — Presses — Part 1: General safety requirements
- ČSN EN 12622+A1:2015
Safety of machine tools — Hydraulic press brakes
- ČSN EN 201 ed. 2:2010
Plastics and rubber machines — Injection moulding machines — Safety requirements
- ČSN EN 289:2014
Plastics and rubber machines — Compression moulding presses and transfer moulding presses — Safety requirements
Domestic appliances:
- ČSN EN 60704-1 ed.2
- ČSN EN IEC 60704-1 ed.3
- ČSN EN IEC 60704-2-1 ed.4
- ČSN EN 60704-2-2 ed.2
- ČSN EN 60704-2-3 ed.2
- ČSN EN 60704-2-4 ed.3
- ČSN EN 60704-2-6 ed.2
- ČSN EN 60704-2-7
- ČSN EN IEC 60704-2-8 ed.2
- ČSN EN 60704-2-11
- ČSN EN 60704-3 ed.2
For all measurements, we use modern measuring equipment:
- 10 microphones
- multi‑analyzer
- acoustic intensity probe
- acoustic camera
- sound level meter “Svantek”